DA VINCI JUNIOR 1.0 PRO

~da Vinci
Jr. 1.0 Pro

A Compact 3D Printer for Professionals

Print with any 3rd Party Filament

The da Vinci Jr. 1.0 Pro has adjustable temperature settings for the extruder nozzle, making it compatible with 3rd party 1.75mm PLA filaments.
With it's auto-loading filament system, the da Vinci Jr. 1.0 Pro ensures that all filament is fed properly

Auto-calibration System

The da Vinci Jr. 1.0 Pro uses an intuitive 9-point calibration detection system that accurately determines the distance between the extruder and the print bed

XYZware Pro

The new XYZware Pro has increased maximum printing speed of 100mm/sec., decreasing the time you have to wait for your prints to be finished. With adjustable software settings, you can change the nozzle and print bed temperature, speed, print support and retraction settings.
XYZware Pro is compatible with third party g-codes*
*(Cura and Slic3r)

0.3mm Nozzle Upgrade Optional Add-on

A 0.3mm diameter extruder is available as a separate purchase add-on for the da Vinci Jr. series and it is perfect for intricate print jobs. The 0.3mm diameter extruder can provide a smoother print surface at a spectacular 50 micron resolution

New Wind Duct Extruder Design for Better Prints

The da Vinci Jr. 1.0 Pro features a new wind duct design which enhances the cooling effect to provide a smoother printing performance.

~Specification

• Print Head Single Nozzle
• Specifications
• Connectivity USB 2.0, SD card *Systems are compatible with SDHC cards up to 32GB in size
• Dimension 42 x 43 x 38 cm
• Filament Diameter 1.75 mm
• Printed Extruder 0.3 mm
• Resolution Fast 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)
• Weight 15kg (Gross)
• Filament Material PLA
• Nozzle Diameter 0.4 mm /0.3 mm (Optional)
• SPecifications
• Connectivity USB 2.0, SD card *Systems are compatible with SDHC cards up to 32GB in size
• Dimension 42 x 43 x 38 cm
• Filament Diameter 1.75 mm
• Printed Extruder 0.3 mm
• Resolution Fast 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)
• Weight 15kg (Gross)
• Filament Material PLA
• Nozzle Diameter 0.4 mm /0.3 mm (Optional)
• Display Panel Type 2.6” FSTN LCM
• File Types .stl, XYZ Format (.3w, .nkg), Windows (.3mf ). gcode
• Hardware Hardware Requirements (for PC/Mac) X86 32/64-bit compatible PCs with 4GB+ DRAM (for PC) X86 64-bit compatible Macs with 4GB+ DRAM (for Mac)
• Maximum Printing Speed up to 100mm/s* * Note: maximum printing speed tested by actual material extrusion speed under laboratory testing conditions, actual printing results may vary.
• OS Support Windows 7 and above (for PC) Mac OSX 10.9 and above (for Mac) Note: Stardard VGA driver on operating system, or a graphics card doesn't support OpenGL 2.1, may cause unknown error in XYZware.
• Print Technology FFF (Fused Filament Fabrication)
• Printing Temperature Range Printed Extruder 190°C ~ 230°C (374°F ~ 446°F)